What is UL1330 Teflon wire 丨 Buy Teflon wire precautions

Aomaga(zhongshan)electronic&plastic Co., Ltd. focusing on the wire for fourteen years, use the "core" to do each! Today Xiaobian to share with you a "What is UL1330 Teflon wire 丨 buy Teflon wire notes"

What is Teflon wire

Teflon wire is used for AC power transmission line with fixed voltage of 0.6/1KV and below or connecting wire and cable for mobile electrical appliances. The product has the characteristics of heat radiation resistance, cold resistance, acid and alkali resistance, corrosive gas and waterproof, and the structure is soft. It has convenient radiation, stable electrical performance under high temperature (cold) environment, outstanding anti-aging performance and long service life. It is widely used in metallurgy, electric power, petrochemical, electronics, automobile manufacturing and other industries.

Teflon wire basic parameters

▶ Insulator: FEP Teflon

▶ Conductor: tinned copper wire / silver plated copper wire

▶ Rated voltage: 600Volts

▶ Temperature range: -60 ° C ~ +200 ° C

▶ Color: white, blue, red, black, yellow, green, yellow green, transparent

▶ Suitable for wiring of high temperature places such as household appliances, lighting fixtures, electronic equipment, and electric heating products

Buy Teflon wire notes

1. The appearance is very smooth and well-proportioned! (The surface of high-quality wires is very well-balanced);

2. The degree of tearing of the insulation of the outer skin is of high quality (if you need the opposite);

3. The brightness, softness and wire diameter of the conductor are all good and good quality;

4. The centrality of the conductor in the insulation, no eccentricity is better;

5. Good quality wire, smelling with the nose is odorless or only slightly pungent, and the inferior quality is pungent due to the addition of too much auxiliary in the low and return materials.

6. The conductor can be pulled out by hand, and the insulation and the sheath are strongly bent and the color becomes white, indicating that the quality of the plastic is very poor; the insulation is difficult to peel off with the nail, and the peeling can be peeled off to indicate that the grade of the plastic is low.

Tip: The price of non-standard line is cheaper than the standard line, and the length is seriously shrunk. Actually, it is more cost-effective to buy a positive line than to buy a non-standard line, and the non-standard line is worse than the positive line on each index. Many, such as rated load capacity, insulation level, aging time, etc. Safety wires are no small matter. For everyone's safety and comfort, we recommend that you buy a positive marking.